| Power
Requirements: |
120V-1ph-60hz-15amp service. A
power ON/OFF switch is mounted on the control panel. The
standard power connection is a 6' heavy duty power cord with
NEMA 5-15 plug. This model can also be supplied for hard-wired
installation. |
| Indicator Lights: |
Mounted on the face of the control
panel: 1) POWER ON. 2) TANK HIGH LEVEL 3) STAND BY. 4) SUCTION.
5) DISCHARGE. The photo below illustrates the indicator lights
as mounted on the 7000 machine. |
Illustration of
Indicator Lights on EVAC 7000 Machine Face
| Construction |
Rugged steel frame with fully
enclosed top and sides. The control panel is located in the
upper front panel. The read panel opens to permit access to the
interior. |
| Mounting: |
The unit is fitted with pads for
floor mounting. It can also be bracket mounted on a lift
structure or on a wall. |
| Extraction Hose: |
One 15' high temperature, oil
service hose, complete with hydraulic grade fittings connecting
the hose to the unit and to the extraction wand is supplied as
standard. |
|