Mode Switch Discharge:

 In the discharge position, the waste oil in the holding tank will be pumped directly to the waste oil tank. When the oil is pumped down to the calibrated zero level, the pump will continue to run for 10 minutes from the start of discharge. There is an automatic timer to shut off the machine after 10 minutes. You may shut it off when the evacuation is complete or let the machine shut off automatically. 

Function Lights - Indicates which operating function is engaged. 

Vacuum Gauge - Describes the level of operating vacuum to gradually increase over an approximate 60 second period to a terminal vac. of 24" - 28". System efficiency is directly related to the maintaining of this level range.

Digital Fuel Level Display - Indicates the amount of fluid in the on-board holding tank.

Replacement Parts

To purchase replacement wands, evacuation hoses and other parts, please contact John Read.

EVAC 6500/7000

4511 Willow Road, Suite 1

Pleasanton, Ca 94588

(925) 734-5800

(925) 734-5858 Fax