Photo 8, Back Section of the Machine

This photo illustrates the back view of the machine showing the pump, motor, actuator valve and measuring tower.

Testing and Calibration

Before Turning on the Power:

Understand Controls:

1. ON-OFF turns the main power on or off. The Main Drive Motor will start and stop.

2. Mode Switch - OFF - The unit will automatically shut OFF operation when the on-board tank level drops to a minimum safe level or the level reaches the "high tank level" position, regardless of the control switch setting.

Mode Switch Suction:

 Using the evacuation hose and wand assembly. Waste oil can be evacuated from the engine crankcase or transmission. The quality of oil will be accurately measured and held in the on-board holding tank.